Emission Simulation Benchmark Report
Numerical comparison of emission simulations in Dreapex TMM and Setfos.
¹ FWHM, spectrally weighted Mode and emission-position distributions rest on different definitions and are outside this statistic.
Spectral outputs Spectral intensity Normalized spectrum Peak intensity Peak wavelength Envelope FWHM
Color, photometry and efficiency Radiance Luminance Current efficiency Luminous efficacy Blue Index CIE xy CCT CRI
Additional angular assessments Retention Decrease Normalized angular Half-value angle Angular FWHM Lambertian factor Color shift
Power Dissipation Dissipated power Top radiation Bottom radiation Internal angular distribution
Mode fractions Top output Bottom output Substrate Waveguide Evanescent Absorption Nonradiative
Emission properties Purcell factor Decay enhancement Quantum efficiency Lifetime
v0.1.0 · 20261028-01
Benchmark results overview
| Scenario | Spectrum | Power Dissipation | Mode |
|---|---|---|---|
| Baseline device | Tiny difference < 1 ppm | Tiny difference < 1 ppm | Tiny difference < 1 ppm |
| Incoherent layers | Tiny difference < 1 ppm | Tiny difference < 1 ppm | — |
| Birefringent structures | Tiny difference < 1 ppm | Tiny difference < 1 ppm | Small difference < 0.0026% |
| Top / bottom emission | Tiny difference < 1 ppm | Tiny difference < 1 ppm | — |
| Area normalization | Tiny difference < 1 ppm | — | — |
| Dipole orientation | Tiny difference < 1 ppm | — | Tiny difference < 1 ppm |
| Two emitters | Tiny difference < 1 ppm | — | — |
| Thickness sweeps | Tiny difference < 1 ppm | — | — |
| Emission distribution | Dreapex TMM more accurate² | — | — |
| Power Dissipation coordinates | — | Tiny difference < 1 ppm | — |
| Weighted Mode | — | — | Different definitions |
| Finite-band white spectrum | Tiny difference < 1 ppm | — | — |
² Independent accuracy check of the mean emission position; see Emission-Position Distributions.
Report Chapters
- Baseline Results
- Incoherent Layers
- Birefringent Structures
- Emission Direction, Area and Orientation
- Two Emitters and Thickness Sweeps
- Emission-Position Distributions
- Power Dissipation Coordinates and Top Emission
- White Spectra and Color Assessment
- Hemisphere Integration, Efficiency and Weighted Modes
- Comparison Criteria and Scope
The reported data use Dreapex TMM v0.1.0. Reference software versions were not recorded for every case.
Setfos is provided by Fluxim AG. This independent numerical assessment does not constitute certification or endorsement by the reference software vendor.